Panel Factory Q2 Is Difficult to Adjust Production Capacity and Layout New Products Q3 to Meet the P

Panel factory Q2 is difficult to adjust production capacity and layout new products Q3 to meet the peak season

The sales of LCD TV in mainland China during the Spring Festival are disappointing, and the upcoming second quarter lacks the sales stimulation of Golden Holidays. The panel supply may be 7% higher than the demand. The panel factory is not expected to prepare materials in advance in the second quarter. According to researcher Li Qiuwei of Tuolong Industry Research Institute, panel shipments in the second quarter of this year will report on time in the off-season, and manufacturers must adjust their production capacity for a small month. However, the channel inventory of each product in the second quarter is still healthy, so there is no need to worry. It is estimated that the panel price will decline slowly after March, and the panel industry needs to control the capacity utilization to curb the price decline.

Samsung's 55 inch 3D LCD TV has opened a red disc in the United States, and the price of 55 inch LED TV has been greatly reduced. There are signs of explosion of super large TV in advance! Since March, the amount of subsidies for home appliances to the countryside in China has doubled, consumers' demand for large-size LCD TV has been delayed, and consumers in primary and secondary cities expect the launch of LED TV, 3D TV and other new products, which are the main reasons why the panel can not break through the off-season of the second quarter. Tuo Yi suggested that Taiwan panel factory should optimize its product portfolio to meet the peak season of the third quarter, especially 47 55 inch oversized TV and LED TV panels, so as to grab the best battle position before the peak season of the third quarter. Therefore, opening the landing of Taiwan panel factory and setting up an 8.5 generation factory, which can produce 55 inch and 47 inch panels at the same time, will have more advantages in seizing China's super large-size TV market in the future!

The impact of manpower gap Q1 is limited

After the Spring Festival in 2010, the panel industry has a labor gap of 10 20%. According to Tuolong analysis, except for 2009, there will be a labor shortage after the Spring Festival every year. Manufacturers have long been used to it, but the gap in 2010 is larger than that in previous years. Therefore, all factories work overtime during the new year to avoid late shipment, and the manpower gap is expected to be made up in March. Therefore, the impact on panel shipment in February and March is limited.

However, during the Spring Festival, the sales volume of LCD TV is only 2 3 million units, which is not as expected, resulting in an increase in the inventory of panels for 2 3 weeks; After the financial storm, panel manufacturers would rather supply tight than oversupply damage the market price. These factors will promote the continuous decline of panel demand in the second quarter. However, thanks to NB products (including iPad), LED monitor and other new products will be launched successively from the second quarter, and the demand for monitor and Nb panel is expected to begin to heat up in the second quarter.

Large panel helps to reduce production capacity

At present, the minimum selling price of 55 inch LCD TV in China is 7000 yuan. When the subsidy ceiling is doubled to 7000 yuan by the new wave of home appliances going to the countryside policy, it is bound to drive the sales growth of 47 inch, 55 inch and other large-size LCD TVs. Taking the national holiday of 2009 as an example, the sales proportion of LCD TV over 45 inches has exceeded 15%. It is expected that the domestic sales proportion of large-size LCD TV in 2010 will be better than the global sales proportion of 10%.

In addition, LED TV will also show multiple growth. In 2010, the global LED TV penetration is expected to reach 15.9%, and there are 6 million domestic LED TV shipments alone. It is estimated that China's 18% led tv penetration will also be better than the world. Tuoyi suggested that if the product strategy of Taiwan panel factory can develop to the product combination of large-size TV panel and LED TV panel, it will obtain higher benefits and fill the capacity of generation 7.5 and 8.5 lines.

High generation production line can be attacked and defended when landing

At present, the TV panel production lines are mainly generation 7.5 and generation 8.5, and the production capacity of generation 6 is gradually transferred to monitor panel production. The economic cutting of the 7.5 generation line is mainly 42 inches and 47 inches, and the 8.5 generation line is mainly 55 inches and 47 inches. If the demand for 55 inches is strong, the 7.5 generation line will not have production advantages, while the demand for 55 inches will be reduced, and the 8.5 generation line can produce products below 55 inches to fill the production capacity. Therefore, the 8.5 generation line has the advantages of being aggressive and defensive.

With the demand for oversized panels detonated in advance, Taiwan's current open panel industry will go to China to build a 7.5 generation line, and its competitiveness will far lag behind that of Korean industry. Tuo long reiterated: on the premise of requiring the same amount of investment from both sides of the Strait, open the production line of generation 8.5 or even higher to land, so as to maintain the competitive advantage of Taiwan's panel factory and avoid losing business opportunities in vain.

Panel Factory Q2 Is Difficult to Adjust Production Capacity and Layout New Products Q3 to Meet the P 1

GET IN TOUCH WITH US
Artigos recomendados
GP Speedmaster's New Sub-brand "100% Biba" Fully Launches New Products
GP Speedmaster's New Sub-brand "100% Biba" Fully Launches New Products
For game lovers, especially for somatosensory gamers like Xbox, the importance of high-energy batteries is self-evident. If the performance of the 5th battery is strong, it will definitely bring a more lasting experience and enjoyment. In order to meet the needs of game enthusiasts, GP Speedmaster’s new sub-brand "100% Biba" has made full efforts to carefully launch a green and environmentally friendly rechargeable battery with very powerful performance, which perfectly surpasses the traditional nickel-metal hydride in the game field. Rechargeable Battery.The 100% Biba brand new environmentally friendly rechargeable battery has inherited the powerful genetic advantages of GP Speedmaster. Compared with the traditional Ni-MH rechargeable battery, the new 100% Biba environmentally friendly rechargeable battery has a 1.2V full-range constant voltage and a large capacity of 2300mAH. The revolutionary technology makes it a new-generation leader in the rechargeable battery industry. Under the recommendation of gamers, 100% of the new Buba battery was snapped up by the whole people, and battery sales continued to soar, and it was also known as "the best cp partner for Xbox controllers."The discharge performance of the new generation of 100% Biba environmentally friendly rechargeable batteries is quite strong, suitable for use in various high-current and high-voltage electronic devices such as gamepads and wireless mice. The social media 3DM game network has conducted actual evaluation on it, and the results show that the 100% Biba battery does have excellent performance. Faced with the tests of many games such as "Monster Hunter WorldIn the 5-hour gaming experience, the fully-powered 100% Biba battery strongly assists the Xbox controller, presenting an excellent gaming feast full of speed and excitement.In addition to the amazing battery life, the new generation of 100% Biba's new generation of environmentally friendly rechargeable batteries has also passed the authority SGS quality certification. More than 90% of its battery materials can be recycled, and the battery can be used repeatedly for more than 300 times. The environmental protection level is among the top in the world. . Even if it is stored for one year in the standby state, the battery still has more than 70% of the remaining capacity. Excellent quality can naturally be loved by consumers.In terms of charging safety, 100% must be very careful. Under the concept of striving for perfection, 100% Beba fits the life charging scene, and designed a "back window" hollow charger with automatic power-off intelligent recognition, so that the safety issues such as heat dissipation, short circuit, overcharge, etc. have been greatly improved. The improvement brings us a safer charging environment.It can be said that the emergence of a new generation of environmentally friendly rechargeable batteries with 100% Biba has become a boon for game enthusiasts. I believe this 2300 mAh super-capacity rechargeable battery set combination, you will fall in love with it after using it!fqj
Amazon Echo Accounts for 70% of the U.S. Voice Market, and Microsoft Launches New Products to Challe
Amazon Echo Accounts for 70% of the U.S. Voice Market, and Microsoft Launches New Products to Challe
According to a report released by emarketer, a market consulting firm, Amazon dominates the voice control market in the United States. This year, about 70.6% of American voice smart speaker users use Amazon products, far exceeding Google, which ranks second. Google accounts for only 23.8%, and other enterprises account for 5.6% of the market, including Lenovo and LG. Some analysts pointed out that Amazon and Google do not rely on hardware to make money, but to collect user data.Techweb reported on May 10 that on Tuesday, Amazon launched its new device echo show, which is a smart audio with a touch screen. Just a few weeks ago, Amazon just launched echo look, the first echo device with a built-in camera.Before that, echo equipment was controlled by voice. The new equipment broadened the territory of echo and voice assistant Alexa. Sometimes it is too inconvenient and complex to issue voice commands. Now these problems can be solved. For example, show is equipped with a 7-inch touch screen. We can use it to assist voice shopping. We can watch videos, view weather forecasts, lyrics and photos, check baby monitoring devices, and view information captured by security cameras.Show is available in black and white, priced at $230. If you buy two at a time, you can get a discount of $100. In the United States, it can be booked on Tuesday and listed on June 28.Meanwhile, according to the news on the Chinese website of the Wall Street Journal, Microsoft will launch a smart speaker that can make calls to challenge Amazon's echo. Microsoft cooperates with Samsung Electronics to launch a smart speaker that can be used to make phone calls. Microsoft will launch invoke this fall. It will be two years since Amazon launched echo. According to Morgan Stanley's report, 11 million echo units have been sold by the end of last year. Voice controlled invoke is made by Harman Kardon subsidiary of Samsung Electronics. Microsoft's Cortana digital assistant is used to process instructions, play music and check traffic conditions, Users can also try other smart home functions, such as voice control to turn on the light. Harman stressed that the device integrates Microsoft's Skype Internet telephony service.
Yasheng Technology's 1100W High-power Front-end Power Supply Series Adds a Number of New Products Su
March 14, 2016 -- China News -- Artesyn embedded technologies announced that the company's DS1100 series 1100W high-power front-end power supply adds two new product lines, which are applicable to two extremely wide input voltage ranges of 90V to 264v (AC) and - 40V to - 72V (DC). Ds1100sl series is most suitable for devices with extremely limited circuit board space, including network switches, routers, enterprise servers and similar applications with extremely small appearance. It is a favorite power system for system design engineers developing such products.The new ds1100slpe-3 AC / DC power supply series and ds1100tdc DC / DC power supply series adopt the industry standard 1U x 2.1-inch rack package and are equipped with the same output connector, so they are most suitable for data center equipment that must use AC and DC power supply.Ds1100slpe series high-power front-end AC / DC power supply is suitable for a wide AC input range of 90V to 264v, and can provide one 12V main output and another 3.3V standby output. The conversion efficiency of this series of power supplies is up to 94%, meeting the efficiency requirements specified in 80 plus platinum certification, and the main output of 12V can provide up to 90a.Ds1100tdc series is a DC input version of high-power front-end AC / DC power supply. It is suitable for DC input voltage from - 40V to - 72V. It can provide one 12V main output and another 3.3V standby output. The main output can provide current up to 91.7a.These two series of new power supplies even when the load is as low as "0" can also provide regulated output, so it is most suitable for systems with distributed power architecture, which can feed the downstream DC / DC converter of such systems. Since it is equipped with active current sharing control function, multiple power supplies can be connected together in parallel, it can also support applications that must provide very high output current without adding additional components. These two The series power supply can support hot plug function, which is most suitable for redundant applications such as fault tolerance, N 1 and N n. there are two air cooling versions to choose from. One is suitable for air flow from DC connector to AC connector, and the other is opposite.These power supplies controlled by digital technology meet the technical specifications of pmbustm. Each product has built-in I2C serial interface, so that the general pmbus graphical user interface of yatson technology can be used to perform system setting, monitoring and control functions.Introduction to yatson Technology Co., LtdArtesyn embedded technologies Specializing in the design and production of stable and reliable power conversion and embedded computing solutions, its products are suitable for many different industries, including communication, computing, medical, military, aerospace and industrial production. For more than 40 years, yatson technology's customers have been convinced that the company can provide them with cost-effective and technologically advanced network computing and power conversion solutions, So that they can launch their products to the market faster and reduce investment risks. Atson technology has more than 20000 employees all over the world, ten advanced technology R & D centers and four world-class factories, and sales and technical support offices all over the world.
How many new products are launched under branded par stage lights ?
How many new products are launched under branded par stage lights ?
GUANGZHOU TORY LIGHT CO.,LIMITED specializes in supplying high quality led par light for many years. Enterprise spirit: Gratitude, tolerance, integrity, dedication Enterprise philosophy: Develop with innovation and the pursuit of excellence Core value: Respect customers, understand customers, serve customers moving head light is of reliable quality and high safety. It is widely applicable and is common in multi-purpose halls, studios, conference centers, auditoriums, theaters, concerts, stadiums, dance halls, and other entertainment venues. moving led lights produced by TORY is very popular in the market. With all its features like outdoor led par, led par light is conducive to popularization and application. Being well encapsulated, the product is able to work well under bad conditions. Meticulous package make sure the led stage lighting in good condition after delivery. Its dimming function offers various strobe effects. For product quotation, please contact TORY.What is the maximum diameter of the filter? The filter is the equipment that realizes the solid-liquid separation using the porous filter. Filters are used in sectors such as chemical, petroleum, pharmaceutical, light industry, food, mineral processing, coal and water treatment. Filter is a new type of filtration system. it has novel structure, small size, simple and flexible operation, high efficiency and closed work. it is a multi-purpose filtration equipment with strong applicability.What are the specifications of the intermediate filters for each filter accuracy, the air volume per unit area, or the air flow speed, and how to calculate the pressure loss? There are also some so-called national standard specifications: 484*484 *?Generally, there are some detailed requirements,The amount of ventilation is related to the flow rate,Generally, one Shanghai index is required,Loss of pressure,The initial pressure is generally 200,The end pressure is not big,There are also hundreds of Pa, which have national standards,
Reference Design of Power Supply and Serializer for Automobile Camera Module
Reference Design of Power Supply and Serializer for Automobile Camera Module
A seemingly simple design, in fact, is full of the efforts and day and night of digital engineers. This design needs to be tempered and evaluated repeatedly before it can be put on the market. Ti designs reference design library, sincerely create a classic for you! Want to find more reference designs? Log in Ti designs reference design library and you will have the design you want!Ti designs design library will launch a series of selected reference designs for you, including industrial, medical, automotive electronics, factory automation and control, building automation, personal electronics and other applications. It will be updated every week. Don't miss it! Now, let's take a look at the good recommendations in the fifth issue of "automotive electronic reference design"!Design OverviewPmp9351 is a compact power supply and serializer solution for automotive auxiliary camera module, using omnivision image sensor ov10635. This reference board has two lmr22007 Synchronous Step-Down regulators, which provide two 3.3V outputs and one 1.5V output to power the ov10635 evaluation board bypassing the on-board LDO. This design occupies 20x20mm effective PCB board area. The system input voltage is 9V rated voltage from ECU, and its input range is 5.5V to 20V. This reference board includes a ds90ub913q serializer and supports a coaxial cable power supply configuration, allowing the transmission of input power and FPD link III signals through a coaxial cable.Design system block diagram (click here to download the complete block diagram)Design characteristics:·Power supply and serializer solution specially designed for omnivision ov10635 image sensor in automobile camera·Compact solution size, circuit board area 20x20mm·3.3V and 1.5V outputs, including output filters to cover I / O, core, analog voltage rail and ensure high image quality·5.5V to 20V working input voltage range, 9V rated input from ECU·The coaxial cable power supply configuration transmits the input power supply and FPD link III signal through a coaxial cable·Through a compatible interface, the ov10635 EVM can be connected with only a slight modification of the circuit boardDesign documents (click here to download the complete design resources)Design demonstration:Relevant design recommendations:Reference design 1: Automobile USB battery charging reference designDescription: the size of the USB battery charging reference design has been optimized and can be installed in the automobile power supply accessories port. The design adopts a USB special charging port controller with integrated current limiting power switch and 42V DC / DC converter. High integration and small package size create a small shape.Reference design 2: reference design of dual port automobile USB chargerDescription: by using tps40170 PWM step-down controller, this power management reference design provides 5V regulated output with its small shape specification to power two USB ports, of which each port is 2.1a (4.2a in total). After optimization, this design adopts 12V rated input and can accept 8-60v.For the original text, please refer to: http://www.deyisupport.com/blog/b/behindthewheel/archive/2014/08/04/51784.aspxTexas Instruments online technical support community answers technical problems and provides technical support for Chinese electronic engineers. Deyi community involves analog electronic technology, single chip microcomputer, MCU, embedded system, DSP and digital signal processing. It is the preferred technical exchange platform for electronic engineers designed with Ti chip. More Forum Highlights, please visit: http://www.deyisupport.com/
Belkin Introduces Thunderbolt 3 Docking Station Pro, Which Supports Both MacBook and Windows PC Syst
Belkin Introduces Thunderbolt 3 Docking Station Pro, Which Supports Both MacBook and Windows PC Syst
Today, Belkin, a well-known peripheral manufacturer, launched a new docking station - the new thunder 3 docking station pro, which is compatible with both MacBook and windows PC operating systems.It is reported that the product is an upgrade of the original lightning 3 expansion base. It is compatible with lightning 3 and a variety of other usb-c host devices (such as MacBook and new iPad Pro), as well as windows laptops and smartphones, which greatly improves the efficiency of the device. The 170W power adapter is attached to provide sufficient power supply for each interface. At the same time, it can provide up to 85W power supply for the connected host without additional power connection.Multiple ports have been greatly expanded. It includes 1 usb-a 3.1 port, usb-c 3.1 port, 4 usb-a 3.0 ports, 2 thunderbolt 3 ports, SD card, DisplayPort port and Ethernet port, which can easily connect multiple devices. It supports dual HD display output, the latest DisplayPort 1.4 standard, and supports up to 8K / 30Hz or 5K / 60Hz resolution output. The ultra-high speed SD card slot supports uhs-ii (ultra high speed II), and the transmission rate can reach 312 MB / s, which is three times faster than that of uhs-i, saving more time for image processing professionals.It also supports the daisy chain connection of up to 6 lightning devices, standard lightning 3 cables, and supports the data transmission speed of 40Gbps. The cable length is about 0.8m, which is enough to be installed around the furniture or further away from the main socket to provide a more general desktop configuration.This is a product upgrade of the award-winning thunder 3 expansion base, hoping to provide convenience not only for MacBook users, but also for Windows PC users. The new thunder 3 expansion base Pro will provide a one-stop solution for professionals who need to work with multiple devices to improve work efficiency.In terms of price, the official price of thunder 3 expansion base Pro is 2498 yuan. At present, the product has been listed and sold in relevant channels.
Exploding Samsung Phones Show Perils of Building Better Battery
Exploding Samsung Phones Show Perils of Building Better Battery
Samsung Electronics Co., under pressure from consumers for longer-lasting batteries that charge faster, pushed the limits of lithium-ion technology. The effort backfired when some of its new Note 7 handsets caught fire and exploded.Building a better battery has long bedeviled the tech industry. Smartphones are constantly improving, with sharper displays, improved software and cameras rivaling those used by the pros. Not so the batteries, which despite advances still die faster than consumers like and take too long to recharge."It's the race to add new capabilities and features to the phone that demands a more capable battery," said Martin Reynolds, a Gartner analyst.On top of the demands placed on their performance, batteries are getting slimmer and smaller, as smartphone makers try to win over consumers with thinner devices. That's putting strain on the manufacturing process, and raising the risk of defects that can lead to the kind of malfunctions seen in Samsung's phones.The Note 7 was supposed to stand out with its stylus, large edge-to-edge display and faster charging technology. Samsung rolled out the device in August, just before Apple Inc. unveiled a new batch of iPhones. It was a opportunity for the Suwon, South Korea-based company to outshine its biggest smartphone rival. Instead, it backfired.Usually, smartphone makers and wireless providers rigorously test products before they reach customers, although the process is mainly focused on making sure the devices are compatible with wireless networks. Samsung provided carriers with the typical amount of testing time before the launch date, according to people familiar with the matter. Samsung first showed prototypes of the Note 7 to carriers in April and testing began in May, said the people, who asked not to be identified because the arrangements aren't public.At least one major Samsung partner is reassessing its testing procedures to catch issues like this in the future, according to a person with knowledge of the matter. The South Korean manufacturer is holding multiple meetings each week with major carrier partners to discuss the latest details from its investigation and assist in mitigating the issue, the person said.Headaches involving the production of lithium-ion batteries aren't unique to the smartphone industry. Overheating battery packs made by Sony Corp. led to the recall of millions of laptops made by Dell Inc., Toshiba Corp. and others in 2006, while Boeing Co.'s 787 Dreamliner suffered from electrical fires after the airplane's 2011 debut.For an explanation of how batteries work, click here."Based on our investigation, we learned that there was an isolated issue with the battery cell," Samsung said in an e-mailed response to questions. "Overheating of the battery cell occurred when the anode-to-cathode came into contact with each other, causing a very rare manufacturing process error." Samsung is working to fix the problem. While only about three dozen cases were reported, the company is seeking to replace 2.5 million Note 7 phones, an endeavor that could cost as much as $2 billion . On Wednesday, Samsung placed advertisements in South Korea's major newspapers to apologize for the incident. In an effort to prevent any more device explosions, the company is also rolling out a software update on Sept. 20 that will limit the battery charge at 60 percent. Availability of that update outside South Korea will vary depending on each market, Samsung said.The Note 7 features a larger battery than its predecessor, one that can store 3500 milliamp hours of electric power, compared with 3000 mAh for the Note 5 (Samsung skipped a number this year, to match its flagship Galaxy S7). By comparison, the iPhone 7 Plus, the Note 7's main competitor, has a 2900 mAh battery. While Apple has also sought to upgrade its battery technology to support better screens and faster graphics, it hasn't often promoted battery life as a feature itself. Last week's iPhone event was an exception, when the company highlighted that the iPhone 7 can last almost two hours longer than its predecessor thanks to better software and processor design.Samsung SDI Co.was the main battery supplier for the Note 7, according to a person with knowledge of the matter.The batteries failed becausea separator within the cells was too thin and electrodes weren't properly insulated, according to a government quality inspection agency in China, where almost 2,000 Note 7s were distributed as test devices. Samsung, which is preparing to get replacements into the hands of customers from Sept. 19, said in a statement that "all Galaxy Note7 replacement devices will be equipped with the battery from other suppliers." For the past few years, Samsung has adopted Quick Charge , a technology developed by Qualcomm Inc., throughout its product lineup, including the Note 7. Using specialized chips, circuits and software, the mechanism works in tandem with a specific charger to speed up the process. While that has enabled rapid charging -- up to 50 minutes faster than its predecessor -- it's also pushing up against the physical limits of the materials and design used in battery technology. Gartner's Reynolds noted that fast charging is essentially a solution to the problem of short battery life."It's a feature driven by short battery life in general, not something that people really want," he said.The first batch of Note 7 batteries probably had a flaw in their design that didn't work properly with the chemistry in some units, according to Kyle Wiens, creator of iFixit, a popular website that dissects the innards of gadgets to gauge the ease of repairing the devices. Fast charging "crams as much energy as possible into the battery, and the closer you push it to the edge, the more of a potential safety issue there is," he said.
Renesas Energy Saving "function Module" Solution
Renesas Energy Saving "function Module" Solution
"Function module" is composed of Renesas's high-performance MCU, power device and simulator, and provides customers with hardware, software and system technology as a complete set of solutions. In this way, the time of system development can be shortened, the number of components can be reduced, and the higher performance and function of the system can be promoted.Power electronics technology to promote low power consumptionPower electronic technology refers to the overall name of the system of generating electric energy (power generation), transmitting electric energy (power transmission), changing electric energy (power transformation) and storing electric energy (power storage), and also includes the meaning of constructing and using the system.Power electronics is composed of circuit technology, control technology, application technology and so on. At present, the biggest purpose of power electronics is to reduce power consumption. How to generate, transmit, transform and store electricity more efficiently, and support the technology of power electronics to promote low power consumption.Development of power electronics technologyCurrent situation and subjectIn order to reduce power consumption, today's power electronic systems pursue accurate work control, efficient operation and reduce the waste of energy consumption. Therefore, the traditional analog control will be replaced by digital control using MCU.Analog control does not need to understand the knowledge of MCU for the circuit designer of power electronics technology. However, once the era of digital control, the circuit design of power electronics technology must have a sufficient understanding of MCU and its suitable devices. Similarly, the software designer must also understand the complex power electronics technology circuit.In fact, we can hear from many analog designers of power electronic technology circuits that they are difficult to adapt to MCU and MCU software development, resulting in confusion.In addition, the design should also start from the function, performance and cost. It takes a lot of time to select the most appropriate MCU and its matching devices.Moreover, for more and more power electronic technology systems that need digital operation control, flexible use of MCU with higher performance than traditional MCU and high-precision system design integrating power electronic technology circuit and control software require designers to have higher knowledge and experience."Answer" to the subject of power electronic technology system developmentExpecting "function module"For a long time, Renesas has launched various low-end to high-end control MCU for power devices such as IGBT and MOSFET, as well as analog-digital IC, optocoupler and driver IC. Renesas proposes to take the "AC-DC", "DC-DC" and "DC-AC" functions of the basic functions of power electronic technology circuits as "functional modules", which will give full play to this technical strength.Thus, in order to realize the required functions, Renesas can support all-round proposals from MCU, power devices and various ICs to system implementation.It has also been mentioned before that when developing the power electronic technology system promoting digital control, the power electronic technology circuit designer has insufficient knowledge and experience in MCU and MCU software development, as well as the time spent on the selection of MCU and various devices.However, after using the MCU and devices recommended by Renesas as "functional modules", designers do not need to spend too much time on selection, but can focus more on circuit design and software development. In addition, Renesas has also prepared a large number of technical data such as MCU routines and device usage methods, which can be fully and reliably supported by designers.In addition, designers can also design higher-level circuits by participating in various seminars arranged by Renesas, such as device application, power electronic technology circuit design, MCU control program development and so on.The "function module" provided by Renesas can be said to be the "answer" to overcome the problem of power electronic technology system development."Functional module" of power electronic technology systemOrdinary power electronic system is composed of several functional modules, and its functional modules can find a common structure. The input is analog signal and the output is PWM (pulse width modulation) signal. The control circuit is composed of MCU and program, and the power circuit is composed of driving circuit and power device.The input analog signals include voltage, current, temperature, speed, etc. The output PWM signal has constant amplitude and different duration pulse sequence to drive power devices such as IGBT (insulated gate bipolar transistor) and power MOS FET. The control circuit integrates the control algorithm as a software program. Even the same functional module can meet different specifications by changing the program.Let's take a practical look at the cases of four areas of special concern in the power electronic technology system using the "functional modules" provided by Renesas.â—† household solar regulator to maximize solar energyFirst of all, we want to introduce the household solar power generation system. The system is called "household solar regulator", which is composed of control circuit composed of "DC / DC boost module", "frequency converter module" and MCU. The direct current generated by solar panel power generation is converted into alternating current through frequency converter and then transmitted to commercial power supply system.The output power of the solar panel will not only change due to the sunshine conditions, but also change due to the voltage required on the load side. At this time, MCU is used to control the DC / DC boost module to keep the output power of the solar cell at the maximum value through a control mode called "maximum power point tracking (MPPT).â—† motor frequency converter for air conditioner to realize energy saving and muteNext, we will introduce the motor control system of household air conditioner. The system is called "motor frequency converter for air conditioning", which is composed of control circuit composed of "PFC (power factor correction) module", "three-phase frequency converter module" and MCU. PFC module can rectify the input commercial power AC into DC, and remove harmonic noise at the same time. The three-phase frequency converter module converts the DC into three-phase AC (the phase difference of the three potential is 120 degrees) to drive the motor smoothly. The speed of the motor is monitored through the sensor, and the operation of the functional module is always controlled at the best value through MCU.â—† UPS (uninterruptible power supply device) with high efficiency backup power supplyNext, we will introduce the application example of small ups. The system can be used as a standby power supply when the commercial power supply stops power transmission for some reason. The power supply time of different UPS also ranges from 3 minutes to 3 hours.UPS is composed of control circuit composed of "PFC module", "DC / DC boost module", "frequency converter module" and MCU. PFC module can rectify the AC input from commercial power supply into DC, and remove harmonic noise at the same time. The DC power is stored in the battery inside the ups. The DC / DC boost module usually converts the output of PFC into appropriate DC voltage and supplies power to the battery at the same time. In case of power failure, it shall be output from the battery and boosted to the appropriate DC voltage. The frequency converter module converts the current output by the DC / DC boost module into the same AC power as the commercial power supply.â—† electric vehicle (EV) charging station supporting the next generation of vehiclesFinally, an example of charging station for electric vehicle (EV) is introduced. EV charging station is a new system that can charge electric vehicles (EV) in a short time. It is believed that the number at home and abroad will increase rapidly in the future.The EV charging station is composed of a control circuit composed of "three-phase PFC module", "insulated DC / DC converter module" and MCU. The input power supply is not the usual 100V AC power supply, but a three-phase 200V AC power supply. In order to shorten the charging time, a high-power power supply is also used. The three-phase PFC module is the same as the PFC module mentioned above, which can convert three-phase AC into DC. The insulated DC / DC converter module electrically insulates the input and output and generates the high voltage and high current required for EV charging.So far, Dr. tanamoto has introduced many examples of power electronic technology systems that make use of "functional modules". Next time, we will introduce Renesas MCU, power devices and simulator products that support the "function module" solution.
Disabling Secure Boot and Third Party Drivers
Disabling Secure Boot and Third Party Drivers
Since secure boot only allows the computer to use trusted operating systems and drivers, protecting against rootkits, disabling it would allow malware to hide in the boot loader and make itself difficult to detect. While secure boot does not protect against malware, it attempts to prevent malware from getting a deeper foothold on the system. That being said, many Linux distributions require secure boot to be disabled in order to boot. From your post it sounds like Linux Mint might work with secure boot if you disable third party drivers, but the open source drivers could cause problems with your system's performanceWhilst installing linux mint 19.1 cinnamon i checked the "I want third party drivers box".However, upon checking that box i was prompted to create a password in order to disable secure boot.Thus, i disabled secure boot after rebooting my machine, as prompted.Now however, after rebooting (and with every boot up) my monitor displays a huge warning reading "booting into insecure mode", before displaying the mint login screen.Is this now something that i should not be bothered with, or did i mess up the installation process somewhere along the line? And is using this "insecure" mode somehow making me more susceptible to any "attacks" or the like - which the name seems to imply to a layman like me?·OTHER ANSWER:Whilst installing linux mint 19.1 cinnamon i checked the "I want third party drivers box".However, upon checking that box i was prompted to create a password in order to disable secure boot.Thus, i disabled secure boot after rebooting my machine, as prompted.Now however, after rebooting (and with every boot up) my monitor displays a huge warning reading "booting into insecure mode", before displaying the mint login screen.Is this now something that i should not be bothered with, or did i mess up the installation process somewhere along the line? And is using this "insecure" mode somehow making me more susceptible to any "attacks" or the like - which the name seems to imply to a layman like me?
Change USB Vendor Id / Product Id
Change USB Vendor Id / Product Id
You might be able to do this with devcon (easiest ways to install listed here), a utility provided with the Windows DDK/WDK. You can find a standalone version suitable for Windows XP at the link.In particular, devcon's sethwid command may be able to do what you are looking for. See Examples page for some tutorials. I am not sure this will do exactly what you want, but I've a strong feeling that it may be as close as you will get without writing your own filter driver. If you do need to write your own driver, grab the WDK and read the devcon sourcecode in srcsetupdevcon.You may also be able to use devcon in other ways to accomplish your goal, but without further details it's hard to say exactly how. Good luck!.1. I recently discovered "corn in a cup" from a mexican street vendor?Love that stuff. It is sold in India too, many different flavours are available. My family loves it, I make it at home too using cheese spread, butter,lime, pepper, finely chopped mint2. I need to find a native iPhone and Android app developer. Is there a website that aggregates and rates mobile app developers so that we can choose the right vendor?actually , if your company is e-commerce, you should try SimiCart- it's a mobile commerce solution which helps building Magento mobile app for your e-commerce store automatically at reasonable price and high quality support.. Check it out now3. Could I make a ton of money by posing as a hot dog vendor at Fenway Park?you might as well dress up as a player4. How can I upgrade my Wix e-commerce website for a multi-vendor/marketplace site?I would suggest you to not choose Wix if you want to Make a E-commerce website then go through Wordpress as it is the best website making platform or you can choose other platforms.But if you want to go through Wix then there are many tutorial present in YouTube or Google that could help youThank YouIf you liked my answer, Could I get an Upvote?5. Help! Where can I buy 4" wide ribbon online? Gotta be a US vendor...?There is a website goldenopenings.com that has ribbon up to 36" wide - enjoy6. Does "vendor" mean seller or manufacturer?In law, the vendor is chiefly the selling party that sells to the end user. Now, that sounds like fudging things a bit, but it is not . The reason for that "sells to the end user" is because in any chain of supply, there are several contracts of sale of goods at work. Each buying party in that supply chain is effectively the end user to the selling party.In other words, a vendor is the supplier in a supply chain: anyone who provides goods or services to the buyer (a company or an individual).In trade and commercial language, a vendor also manufactures stuff and sells them to customers (wholesalers or retailers), so that may explain the confusion about seller vs. manufacturer. Does "vendor" mean seller or manufacturer?7. How can we improve the situation around recognizable low-level vendor-specific solutions (e.g. on Android)? [closed]The simplest way of doing that is improving the questions. Neither of the examples you give are good questions for getting low level answers, because they do not ask for low level answers.Example 1: Call logging with Dual SIMThis is a straightforward request to separate the call logs based on which SIM is used. However, it is completely unclear that the asker even realizes this would be a vendor-specific answer. For instance, he asks, "Can Android do something like that ... or do I have to change Android version?"The correct answer is no, it can not . You might be able to do that on an Android phone, but Android can not do that, and simply changing to another version wo not help it. You need device-specific help. Please forgive the answerer for not listing the exact code for every model of Android device, but I believe that falls under the category of "too broad".Example 2: Call from second simBasically the same as the first, and suffers from the same "What do you know?" problem. However, this time one of the answers gives an actual solution, at least for a certain model of phone. The other answer says the same as before, you need to get in touch with the manufacturer.Also, as Jan mentions in the comments above, neither of these examples mention what type of device they are using at all. How is anyone supposed to give low-level advice without knowing any of the specifics?Your recent dual-sim question: Android: what vendor-specific methods are known for dual-SIM phones to detect a SIM used for SMS?I assume that this is what prompted this question. This is a better question, but it could be better still. First, make it clear that you know this can not be done with the standard SDK. On first reading, it sounds like you are looking for standard ways of doing it. If the question does not make it very clear that you already know the API does not provide this, you are going to get a response of "the API does not provide this," because 99% of users/askers only care about what the API provides, so it's more likely that questions are looking for an API solution.Second, get rid of the "listiness" of the question at the end. If you want an HTC solution and an MTK solution, say exactly that. Do not say "What are most known ways to...", because that attracts an answer for each and every Android vendor, making a list question that has no "right" answer. Also remember that the answer may not even be consistent across all HTC devices, and you may need to get more specific. However, I do not understand what exactly this means: Nobody in any of those threads says "there is no answer." Second, nobody answering those questions has over 1000 rep, so I am not sure if they count as "high-rep specialists. " I have seen similar answers from high-rep users(and I've said it myself on occasion), but your sample questions do not make this clear.By comparison, look at this: Inject uplink audio in call with Snapdragon MSM8960 SoCThe question is specific to a chip, links to related code, and asks for something specific. In return, there is no "you can not do that" in the answer, and an approach is given. The quality of answers is directly related to the quality of the question.Take the advice. They might give you exactly what you need. If so, you can come back and self-answer an awesome question to help future visitors, while gaining that sweet rep to boot. If not, at least you can include that as research in your question. When you do come back with a question, make it as specific as possible, so that it gets a specific answer.Remember, you may not get an answer right away. It could take days, weeks, months, who knows? The crowd of kernel hackers is much smaller than the crowd of API users, and it may take some time for anyone who can answer your question to actually see it
sem dados
Contact us
  • Cel : +86 158-2024-2923
  • Tel(Fax) : +86 020-29835956
  • E-mail : info@torylight.com
    Facebook : Torylight sandy
  • Twitter : @torylight sandy

  • Add : No.1, XinHe Industrial Park, Huadu
  • District, Guangzhou, CHINA
Whatsapp :
+86 158-2024-2923
        
Copyright © 2021 Guangzhou Tory Light Co., Ltd. | Sitemap